Unsanded Grout

Fine, Water Resistant, Polymer Modified, Cement based Non Shrink Grout. Suitable for Grouting all types of Tiles, Swimming Pool Tiles, Decorative Stones, and marbles.

Acqua Tile Grout (Unsanded) is a fine, colored powder which, when mixed with water gives a smooth, easily applied creamy paste for clean grouting of tiles. It sets a decorative water resistant finish.

Acqua Tile Grout (Unsanded) is resistant to cracking in joint up to 3-5mm wide in the hardened state.

MIXING INSTRUCTIONS

Mix Acqua Tile Grout (Unsanded)with clean water at the rate of 3:1 by volume (this ratio may vary according to climate conditions)
Leave to stand for 10 minutes then stir.
Don’t add excessive water in the mixture, this weakens the grout and makes it much more porous.
Grout should have consistency of tooth paste when mixed.

10+

Years of Experience

COVERAGE

Grout coverage vary with the tile size and joint width

WATCH POINTS

Grouting should not start before the tile adhesive has dried out completely.

Packaging

Available in 1kg and 5kg bags.

Shelf Life And Storage

12 months if stored in a dry place in unopened packaging

COMPOSITION, PROPERTIES, APPEARANCE

Acqua Tile Grout (Unsanded) is a blend of cement, hydrophobic polymer contents, cement fillers, additives and metal oxide color pigments to make it in a variety of colors.

UNSANDED GROUT

MIXING INSTRUCTIONS

10+

COVERAGE

WATCH POINTS

Packaging

Shelf Life And Storage

COMPOSITION, PROPERTIES, APPEARANCE

Quick Links

Get in touch