Multifix

General purpose, cement based high quality component, thin or thick bed wall and floor tile adhesive for interiors only

MULTIFIX – STA300 is a cement based general purpose tile adhesive for thin or
thick bed fixing of small format tiles (600x600mm) in interior situations.

MULTIFIX – STA300 is suitable for fixing materials such as ceramic tiles, porcelain tiles, Marble and Stones.

TYPICAL PROPERTIES

Colors : Off white and Grey
Density : 1.1kg/m³
Yield : A 20kg bag mixed with 5 liters of water yields 15.5 liters of mixed adhesive.
Toxicity : MULTIFIX – STA300 is non-toxic and can be safely used in conjunction with potable water.

COVERAGE

Thin-bed fixing: 3 – 4kg/m² at 3mm thickness (Smooth surface using notched trowel)
Solid-bed fixing: 6 – 8kg/m² at 6mm thickness

10+

Years of Experience

APPLICATIONS PROCEDURE

The surface to be tiled should be sound, dimensionally stable, clean and free from dusty or friable materials, paint, grease, oil etc.

SUITABLE SUBSTRATE

CONCRETE
CEMENT SAND SCREED
PLASTER

WATCH POINTS

MULTIFIX – STA300 should not be used on painted or metal surfaces.
The use of chilled water while mixing, will extend open wet time in high ambient temperatures.
Do not use in damp conditions & temperature below 5 degree.

MIXING INSTRUCTIONS

Mix MULTIFIX – STA300 in clean water at the rate of 3:1 by volume(approx. 5 liters water in a 20kg bag)
Leave to stand for 5 minutes then stir. Don’t add further water.

COMPOSITION, PROPERTIES, APPEARANCE

MULTIFIX – STA300 is a blend of Portland cement and graded Sand, reinforced with additive content, with thin / thick bed performance.

WORKABILITY

Working time of MULTIFIX – STA300 is about 20 minutes at 25°C, after 20 minutes standing time and tiles must be fixed in position before drying out occurs. For this reason, it is essential to work with in a comparatively small area at a time.

Colours

MULTIFIX – STA300 is available in Grey & White Colours.

Packaging

MULTIFIX – STA300 is available in 20kg bags.

Storage

Store out of direct sunlight and protect from water.

PRECAUTIONS AND SAFETY MEASURES

This product contains Portland cement which is slightly alkaline when wet. For people with sensitive skin, continuous use may cause irritation. Gloves or a suitable barrier cream should be used. As a general Code of safety practice all chemical products should be treated with care, kept away from children and animals, especially protect eyes and skin. In emergency seek medical advice.

MULTIFIX